Pipe Hanger with Rubber (Epdm Lining )
Application:
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.
Construction:
PIPE HANGER with EPDM lining consists of piece of mild steel shaped to wrap around the pipe. The selection of the proper PIPE HANGER WITH EPDM LINING depends upon the temperature of the piping system and load to be carried. Permits installation before and after pipe is in place. Reduces noise upto 18 db.
Material : Mild steel
Minimum temperature : -20° C
Maximum temperature : 110° C
Finish : Electro-Galvanized
Product Table
| Sr. No | Part Number | Trade Size | Pipe OD in inches | Pipe OD in mm |
|---|---|---|---|---|
| 1 | SFPCR-050 | 1/2″ | 0.840 | 21.336 |
| 2 | SFPCR-075 | 3/4″ | 1.050 | 26.670 |
| 3 | SFPCR-100 | 1” | 1.315 | 33.401 |
| 4 | SFPCR-125 | 1.660 | 1.660 | 42.164 |
| 5 | SFPCR-150 | 1.900 | 1.900 | 48.260 |
| 6 | SFPCR-200 | 2” | 2.375 | 60.325 |
| 7 | SFPCR-250 | 2-1/2” | 2.875 | 73.025 |
| 8 | SFPCR-300 | 3” | 3.500 | 88.900 |
| 9 | SFPCR-350 | 3-1/2” | 4.000 | 101.600 |
| 10 | SFPCR-400 | 4” | 4.500 | 114.300 |
| 11 | SFPCR-600 | 6” | 6.625 | 168.275 |
| 12 | SFPCR-800 | 8” | 8.625 | 219.075 |
| 13 | SFPCR-1000 | 10” | 10.750 | 273.050 |
